STEMA PRO-TECH Workshop Chair with Castors
STEMA PRO-TECH Workshop Chair with Castors je v zaostalem naročilu in bo poslano takoj, ko bo spet na zalogi.
14-dnevno jamstvo za vračilo denarja!
14-dnevno jamstvo za vračilo denarja!
Uživajte v brezskrbnosti z našim 14-dnevnim jamstvom za vračilo denarja.
Če z nakupom niste popolnoma zadovoljni, ga vrnite v 14 dneh za celotno povračilo kupnine.
Politika vračil
Večji nakup, večji prihranek
Večji nakup, večji prihranek
🛒 3-4 izdelki: 3 % popusta
📦 5-9 izdelkov: 5 % popusta
🚛 10-15 izdelkov: 7 % popusta
💰 16+ izdelkov: 10 % popusta
STEMA PRO-TECH Workshop Chair with Castors
STEMA PRO-TECH Workshop Chair with Castors je v zaostalem naročilu in bo poslano takoj, ko bo spet na zalogi.
PRO-TECH — adjustable support for practical workspaces
The STEMA PRO-TECH is a work chair for workshops, laboratories and production spaces. A 38–50 cm seat-height range and adjustable backrest help you fit the chair to your workstation, while soft castors allow movement across hard floors.
Soft TPU foam seat and backrest
The shaped seat and backrest are made from soft moulded TPU foam. The armless design leaves the working area accessible, and the black seat, backrest and base give the chair a consistent finish. No headrest is fitted.
Adjustable backrest height
Adjust the backrest height through 4 cm of travel. Loosen the corresponding screw, set the backrest position and secure it again.
Backrest angle adjustment
Set the backrest tilt angle with the manual control and secure the corresponding screw after adjustment. The supplier does not specify a numeric angle range.
Backrest depth adjustment
Adjust the backrest depth through 2.5 cm of travel to position it relative to the seat. This is a backrest-depth adjustment rather than a sliding-seat mechanism.
Class 4 gas lift and adjustable seat height
The class 4 gas lift adjusts the seat height from 38–50 cm using the lever beneath the seat.
Soft castors for hard floors
The 70 cm nylon five-star base is fitted with 50 mm soft castors suitable for hard floors. Use an appropriate protective mat where additional floor protection is needed.
Dimensions
Overall height: 86.5–98.5 cm; seat height: 38–50 cm; seat width × depth: 47 × 44 cm; base diameter: 70 cm. The supplier states a dimensional accuracy of 1 cm.
Documented testing and care
A positive model-specific safety, strength and durability report is available. The foam arrangement also has positive cigarette and match-flame-equivalent ignitability test results; these results apply to the tested material and conditions. The operating instructions specify a maximum user weight of 130 kg and use for up to 8 hours per day. Clean with mild products and protect the chair from rain, moisture and direct sunlight.
Technical specifications
| Brand | Stema |
|---|---|
| Model | PRO-TECH |
| Product type | Laboratory and workshop chair |
| Colour | Black seat and backrest; black base |
| Supplier SKU / EAN-13 | 5903917407427 |
| Seat and backrest material | Soft moulded TPU foam, as specified by STEMA |
| Seat height | 38–50 cm |
| Overall height | 86.5–98.5 cm |
| Seat width × depth | 47 × 44 cm |
| Backrest height adjustment | 4 cm travel |
| Backrest depth adjustment | 2.5 cm travel |
| Backrest angle | Manually adjustable and lockable; no numeric range specified |
| Seat-height control | Lever-operated class 4 gas lift |
| Base | Five-star nylon base, diameter 70 cm |
| Ground contact | Soft castors, diameter 50 mm |
| Floor suitability | Soft castors suitable for hard floors |
| Foot support | No foot ring |
| Armrests / headrest | Not fitted |
| Maximum user weight | 130 kg, according to the operating instructions |
| Recommended daily use | Up to 8 hours per 24 hours, according to the operating instructions |
| Seat depth mechanism | Backrest depth adjustment; no sliding-seat mechanism specified |
| Safety / strength / durability | REMODEX report 155/26/W, dated 30 July 2026; positive result |
| Test standards | PN-EN 1335-2:2019-03; PN-EN 1728:2012/AC:2013-09; PN-EN 1022:2024-04 |
| Foam ignitability | Positive cigarette and match-flame-equivalent test results under PN-EN 1021-1:2014 and PN-EN 1021-2:2014; applies to the tested foam arrangement |
| Warranty | 2 years, as stated on the supplier product card |
| Packaged weight | 12 kg |
| Carton dimensions | 23 × 67 × 68 cm |
| Packing quantity | 1 chair per carton |
| Assembly | Assembly required; instructions supplied as a download |
| Care | Use mild cleaning liquids; soap-based cleaners for plastic parts. Protect from direct sunlight, rain and moisture. |
| Dimension tolerance | Supplier states an accuracy of 1 cm |
Downloads
Plačilo in varnost
Vaši plačilni podatki so varno obdelani. Podatkov o kreditnih karticah ne shranjujemo in do njih nimamo dostopa.
Razdelite svoj nakup z LeanPay®, NLB Buy&Go® ali Klarna®
Preden potrdite naročilo, enostavno izberite ponudnika obročnega plačevanja, ki ustreza vaši državi.
Zagotovite si 10 € popusta
ob vašem prvem nakupu!
